Crankshaft Measuring Heads
PMK-KW parallel crankshaft measuring heads with titanium nitride coating
precisely measure the parallelism of two surfaces.
In variants with connection threads in M6x0.75 and M10x1.
The repeat accuracy of our 2-point measuring heads at IT 8 is < 1µ.
All Hexacon PMK´s are manufactured of high-quality tool-grade steel and treated at no extra charge with a quality-improving titanium nitride coating. TiN coating provides very good hardness, about 2200 HV, as well as corrosion resistance with very good sliding and friction characteristics. The improved service life results in high cost-effectiveness as well as protection of the measurement object. The measurement points are fabricated from coated hard metal. Diamond measuring points upon request.
PMK-02-KW • Crankshaft parallel measuring head
available with M6x0.75 mm thread and X dimension
2 mm and up. Width from 6 to 20 mm.
Illustration may differ.
Ordering example: øworkpiece = 14H7 = PMK-02-KW-14
PMK-02-KW_6-20mm
PMK-03-KW • Crankshaft parallel measuring head
available with M10x1mm thread and X dimension
3 mm and up. Width 15 mm and up.
Illustration may differ.
Ordering example: øworkpiece = 30 H7 = PMK - 03 - KW - X - 30
PMK-03-KW_ab ø15mm
PMK-AM-KW-03
available with M10x1mm thread.
Default width b=20 mm.
Capital B depends on the shaft diameter.
When placing the order, please indicate the tolerance.
PMK-AM-KW-03_ab ø15mm